Joystick not working on AX1500

I've got an AX1500 connected to a linear actuator to raise &amp; lower a work table.<BR>I've got everything hooked up, and am able to run it up &amp; down via RS232. However, I get nothing when I try to use a joystick.<BR><BR>I'm not getting 5V on pin 14- more like 1.5V.<BR><BR>Joystick: CTI model F1650 single axis<BR><BR>Connections:<BR><BR><U>controller pin</U> <U>joystick</U><BR>(14) +5V out (1) +5V<BR>(13) Ground (2) common<BR>(11) Channel 1 In (5) Y out<BR><BR>I've got 12V power supply feeding Vmotor and controller power inputs.<BR>
Board reconfigured for analog use, and I've read the configuration back to make sure it accepted the update.
<BR>Anything I'm missing here?<BR><BR>Thanks<BR>Don<BR>

Problem solved - stupid amateur mistake.

Was looking at the pinout on the female connector, flipped the male connector the wrong way, &amp; connected to the wrong pins.