HALL COUNTER
7 years 4 months ago #29531615
by niko
Replied by niko on topic HALL COUNTER
Jonas,
For your first question, it is better to choose the run script option.
For your second question. When you are in run tab the utility sends continuously motor commands, even if the slider is at zero. That enables the serial motor command and disables the analog motor command. When you change tab no serial commands are sent and the analog command takes effect. If you tick the Mute check box in run tab then analog command will take effect.
For your first question, it is better to choose the run script option.
For your second question. When you are in run tab the utility sends continuously motor commands, even if the slider is at zero. That enables the serial motor command and disables the analog motor command. When you change tab no serial commands are sent and the analog command takes effect. If you tick the Mute check box in run tab then analog command will take effect.
Please Log in or Create an account to join the conversation.
- jonas.burnickis@gmail.com
- Topic Author
- Offline
Less
More
- Posts: 9
- Thank you received: 0
7 years 4 months ago #29531616
by jonas.burnickis@gmail.com
Replied by jonas.burnickis@gmail.com on topic HALL COUNTER
yeas i understand about mute box and analog enabling in RUN tab,
but what im telling, when you in configuration or console or scripting tab , the analog inputs are always enabled .
but what im telling, when you in configuration or console or scripting tab , the analog inputs are always enabled .
Please Log in or Create an account to join the conversation.
7 years 4 months ago #29531624
by niko
Replied by niko on topic HALL COUNTER
Jonas,
This works as it is.
This works as it is.
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
Time to create page: 0.056 seconds
