SDC2160S Firmware Upgrade Problem

Hi,

I am tring to update SC21xxS firmware to SDC2160 controller over Serial Port but I am getting this message below in the log text box.
"Firmware zbin file should contain one F3 firmware file and one older firmware file."

I have tried with two different controllers but the result is same. Since one of my contrller's USB port is not working (I am not sure why but not a big deal for my conf. since controller is connected over Serial Port in the system) I could not update the firmware.

What could be your suggestion?
Thanks!

Which file are you using as the firmware file?

Hi,

The one in the link below

www.roboteq.com/index.php/component/virt...0s-detail?Itemid=970

(In 2160s' page the file name is 21xx no "S" at the end that is why I have tried at 2130S page)

Hmm, I was unable to replicate your error. Which version of Roborun+ are you using?

It is 1.8

Do you have any suggestion, or any details what is the error about?

Thanks

No, and that's the most recent version of our utility too.

I am going to ask the software engineer who develops the tool and see if he can shed some light on it.

Hey, would you mind posting the firmware file you are trying to use and isn't working on our forum?

EDIT: Also, try this file .

I have attached the one I have.

Also I have tried the one you sent but still getting the same result.

Everything is working fine from my end. I'm not sure what is happening on your end. Perhaps there is something wrong with your Roborun+ install. Do you have access to another computer to test on?