- Forum
- Roboteq Motor Controllers
- PC Software
- SDC2130 + Windows 8 USB driver not signed problem. = no go.
SDC2130 + Windows 8 USB driver not signed problem. = no go.
10 years 9 months ago #29527681
by essence25
Cannot install and control the SDC2130 via USB in Windows 8.
The problem is the SDC2130 USB driver is not signed. There is no way to control the board via USB without this driver or intrusive signature disabling workaround.
I\'m surprised this has been overlooked.
Please help.
Thank you!
The problem is the SDC2130 USB driver is not signed. There is no way to control the board via USB without this driver or intrusive signature disabling workaround.
I\'m surprised this has been overlooked.
Please help.
Thank you!
Please Log in or Create an account to join the conversation.
- roboteq
10 years 9 months ago #29527683
by roboteq
Replied by roboteq on topic Re:SDC2130 + Windows 8 USB driver not signed problem. = no go.
This is the first such report. We\'ll investigate.
Please Log in or Create an account to join the conversation.
10 years 8 months ago #29527723
by ecanes
Replied by ecanes on topic Re:SDC2130 + Windows 8 USB driver not signed problem. = no go.
i have the same problem
i couldnt install sdc2130 driver on windows 8
could you help me?
thanks
i couldnt install sdc2130 driver on windows 8
could you help me?
thanks
Please Log in or Create an account to join the conversation.
- roboteq
10 years 8 months ago #29527731
by roboteq
Replied by roboteq on topic Re:SDC2130 + Windows 8 USB driver not signed problem. = no go.
See below a fix submitted by another user. We are looking into a permanent resolution:
Since the driver is unsigned, there is a slight process.
- Go to Charms menu (right bar)
- Settings > Change PC Settings > General >Advanced Startup > Restart Now > Troubleshoot > Advanced Options > Windows Startup Settings > Restart
- At the boot up choose the option to \"Disable Driver Signature Enforcement
- Copy and paste (replace) the new driver in Roboteq/Roborun Plus/DFU Driver/
- Right click driver (STDFU) and click install
- Plug device in, it should now recognized
If it did not recognize
- Hit Cntrl-X > Device Manager
- Find the unknown device in the list (yellow hazard sign), right click and hit update driver
- browse to the Roborun Plus/DFU Driver/ folder and hit update
Since the driver is unsigned, there is a slight process.
- Go to Charms menu (right bar)
- Settings > Change PC Settings > General >Advanced Startup > Restart Now > Troubleshoot > Advanced Options > Windows Startup Settings > Restart
- At the boot up choose the option to \"Disable Driver Signature Enforcement
- Copy and paste (replace) the new driver in Roboteq/Roborun Plus/DFU Driver/
- Right click driver (STDFU) and click install
- Plug device in, it should now recognized
If it did not recognize
- Hit Cntrl-X > Device Manager
- Find the unknown device in the list (yellow hazard sign), right click and hit update driver
- browse to the Roborun Plus/DFU Driver/ folder and hit update
Attachment STDFU.zip not found
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
- Forum
- Roboteq Motor Controllers
- PC Software
- SDC2130 + Windows 8 USB driver not signed problem. = no go.
Time to create page: 0.062 seconds