Roborun install on Win7 and Win10
7 years 6 months ago - 7 years 6 months ago #29531427
by ASI
Roborun install on Win7 and Win10 was created by ASI
I realize there are issues with Windows 10. I read the earlier post and downloaded to most recent Roborun+ from your website. However the driver will not install successfully. I have followed the instructions for the Win8 driver install (disabling driver signing requirement) with no luck. Reborun itself seems to install ok, but the driver doesn't.
So, after failing to get it to run on Windows 10 I tried to install on a WIn7 machine. Now it fails during install with the error shown in the attachment. "Strip.ocx failed to register".
What do I need to do to get it to work? What is the plan/solution for Win10?
So, after failing to get it to run on Windows 10 I tried to install on a WIn7 machine. Now it fails during install with the error shown in the attachment. "Strip.ocx failed to register".
What do I need to do to get it to work? What is the plan/solution for Win10?
Please Log in or Create an account to join the conversation.
7 years 6 months ago #29531428
by ASI
Replied by ASI on topic Roborun install on Win7 and Win10
No response? I was able to get things to work on my Win10 machine, however I am still unable to install on Win7.
Not sure if the attachment worked, so here is the message I get when I attempt to install:
Module C:\Windows\SysWOW64\Strip.ocx failed to register. HRESULT -2147024703
Contact your support personnel.
This window gives me the options: "Exit installation" "Try Again" "Continue"
If I select continue, it tells me Roborun was installed successfully. Then when I try to run Roborun, I get and "Unhandled exception Occurred" error (Below).
"An error occurred creating the form. See Exception.InnerException for details. The error is: is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
at RoborunPlus.My.MyProject.MyForms.Creat_Instance_[T](T Instance)
at RoborunPlus.My.MyProject.MyForms.get_Roborun()
at RoborunPlus.My.MyApplication.OnCreateMainForm()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()"
Not sure if the attachment worked, so here is the message I get when I attempt to install:
Module C:\Windows\SysWOW64\Strip.ocx failed to register. HRESULT -2147024703
Contact your support personnel.
This window gives me the options: "Exit installation" "Try Again" "Continue"
If I select continue, it tells me Roborun was installed successfully. Then when I try to run Roborun, I get and "Unhandled exception Occurred" error (Below).
"An error occurred creating the form. See Exception.InnerException for details. The error is: is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
at RoborunPlus.My.MyProject.MyForms.Creat_Instance_[T](T Instance)
at RoborunPlus.My.MyProject.MyForms.get_Roborun()
at RoborunPlus.My.MyApplication.OnCreateMainForm()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()"
Please Log in or Create an account to join the conversation.
7 years 6 months ago #29531429
by niko
Replied by niko on topic Roborun install on Win7 and Win10
Hi,
We apologise for the late reply.
Drivers do work on both win7 and win10, and we have not faced any issues apart from the following:
Issues with win8 and later where you could not install unsigned drivers manually. So we have special documentation in that, which you can find in our website (dev.roboteq.com/dev1/index.php/docman/mo...-and-81-drivers/file)
We had another issue in win10 where the device could not be connected to utility via usb. This can be solved with latest utility you will find in our site as well (release datat 10th of October).
Concerning your case I would suggest to uninstall everything and if possible remove the any relevant regisrty keys. Then try to re-install.
They are simple usb drivers and should work.
We apologise for the late reply.
Drivers do work on both win7 and win10, and we have not faced any issues apart from the following:
Issues with win8 and later where you could not install unsigned drivers manually. So we have special documentation in that, which you can find in our website (dev.roboteq.com/dev1/index.php/docman/mo...-and-81-drivers/file)
We had another issue in win10 where the device could not be connected to utility via usb. This can be solved with latest utility you will find in our site as well (release datat 10th of October).
Concerning your case I would suggest to uninstall everything and if possible remove the any relevant regisrty keys. Then try to re-install.
They are simple usb drivers and should work.
Please Log in or Create an account to join the conversation.
7 years 6 months ago #29531430
by ASI
Replied by ASI on topic Roborun install on Win7 and Win10
So I un-installed Roborun and cleared out my registry. Rebooted Windows and re-installed Roborun. Same result. What are the dependencies of Roborun? What .Net version? Does it require a specific version of Microsoft Visual C++ Redistributable?
Please Log in or Create an account to join the conversation.
7 years 6 months ago #29531431
by niko
Replied by niko on topic Roborun install on Win7 and Win10
Hello again,
The dependencies are the following:
- .Net framework 2.0.
- .Net framework 3.5.
Now since you still face problem with Strip.ocx please follow the following steps:
- Extract the attached .rar file (rename .ra_ into .rar).
- Copy strip.ocx file to C:\windows\system32 directory.
- Run cmd as administrator.
- In the command prompt window navigate to the system32 folder:
cd c:\windows\system32
- Register the ocx:
regsvr32 /i strip.ocx
- Try run the application.
The dependencies are the following:
- .Net framework 2.0.
- .Net framework 3.5.
Now since you still face problem with Strip.ocx please follow the following steps:
- Extract the attached .rar file (rename .ra_ into .rar).
- Copy strip.ocx file to C:\windows\system32 directory.
- Run cmd as administrator.
- In the command prompt window navigate to the system32 folder:
cd c:\windows\system32
- Register the ocx:
regsvr32 /i strip.ocx
- Try run the application.
Please Log in or Create an account to join the conversation.
6 years 8 months ago #29532361
by mc
Replied by mc on topic Roborun install on Win7 and Win10
I am having the same issues that ASI had and I cannot open RoboRun+.
Do you have any other suggestions for running the software on Windows 10?
The program worked two days ago, but now it gives an error message whenever I try to open it.
Do you have any other suggestions for running the software on Windows 10?
The program worked two days ago, but now it gives an error message whenever I try to open it.
Please Log in or Create an account to join the conversation.
6 years 8 months ago #29532362
by blake
Replied by blake on topic Roborun install on Win7 and Win10
Yes we have a fix for this error. It requires a specific .ocx file, if you contact me at This email address is being protected from spambots. You need JavaScript enabled to view it. I can send you the fix.
Please Log in or Create an account to join the conversation.
6 years 2 weeks ago #29532910
by PUCCI
Replied by PUCCI on topic Roborun install on Win7 and Win10
Can you help me have same issue on win10
Please
Please
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
Time to create page: 0.090 seconds
