Traction Motor of the Electric Vehicle

14 years 2 months ago #12787294 by hemantdandekar
<P style="MARGIN: 0px">Dear Sir
<P style="MARGIN: 0px">We have 2.5 HP traction motor operated on 24 Volt . On that 4 terminal are given . Two for field and two for Armature. How To interface this motor to AX2850HE controller .

Please Log in or Create an account to join the conversation.

14 years 2 months ago #12787350 by cosma
Replied by cosma on topic Re:Traction Motor of the Electric Vehicle
<P style="MARGIN: 0px">Since you have access to both winding, it looks like you could wire your motor as series, shunt or sepex. Ideally you should look at the manufacturer's recommendations.
<P style="MARGIN: 0px">
<P style="MARGIN: 0px">If not sure, you can try the different combinations while connecting directly to a 12V battery (i.e. without controller) while measuring current and torque. All should make the motor turn but only one configuration will give you the optimal performance.

Please Log in or Create an account to join the conversation.

14 years 2 months ago #12787604 by hemantdandekar
<P style="MARGIN: 0px">We have asked for the lead time and the total cost including shipping for AX2850HE to Mr. Tony Santony but didnot get back the reply. Could you please help us.
<P style="MARGIN: 0px">Thank you.

Please Log in or Create an account to join the conversation.

14 years 2 months ago #12787620 by hemantdandekar

We have consulted the motor manufacturer &amp; he has recomended that the motor be connected as series motor to convert it to a two wire motor. Now can i use this motor with AX2850HE

Please Log in or Create an account to join the conversation.

14 years 2 months ago #12788488 by cosma
Replied by cosma on topic Re:Traction Motor of the Electric Vehicle
Yes

Please Log in or Create an account to join the conversation.

14 years 2 months ago #12788529 by hemantdandekar

Sir We need this controller urgent basis. I want to know the Toatal Price along with shipping cost in INDIA and lead time. We need this AX2850HE controller along with 38400 baudrate.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.112 seconds