Inductance on Power Input

12 years 3 months ago #26558605 by mattb
Inductance on Power Input was created by mattb
My application requires that there be 4' of wire between the battery and the controller inputs. This will all be 2ga wire with a 5000uF/50v cap at the drive input to combat the added inductance. Is there anything else I should consider doing to protect the controller's input stage? I can not ground the chassis.

Thanks,

Matt

Please Log in or Create an account to join the conversation.

12 years 3 months ago #26558706 by cosma
Replied by cosma on topic Re:Inductance on Power Input

Twist the wires together for as much of the lenght as you can. This will help keep the inductance low.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.122 seconds