Breakout board for DB15 connector
10 years 11 months ago #29527223
by pauljurczak
Breakout board for DB15 connector was created by pauljurczak
I just ordered SDC2130 controller and noticed a lack of a quick prototyping option to connect encoders and I/O lines to DB15 connector. It would be nice to have a breakout board with miniature terminal blocks or a set of single row headers (2 x 4-pin for encoders, 3-pin for serial port, 5 x 3-pin for RC, etc.).
Here is a simple example:
Have anyone made a custom breakout board for RoboteQ DB15 connector?
Here is a simple example:
Have anyone made a custom breakout board for RoboteQ DB15 connector?
Please Log in or Create an account to join the conversation.
10 years 11 months ago #29527233
by pauljurczak
Replied by pauljurczak on topic Re:Breakout board for DB15 connector
I ordered an eBay item #120831544933, 0.1\" terminal blocks from DigiKey and here is what I have:
Please Log in or Create an account to join the conversation.
8 years 1 month ago - 8 years 1 month ago #29530506
by TechSupport
Replied by TechSupport on topic Re:Breakout board for DB15 connector
We've recently about a month back introduced the breakout board for the 15 pin controllers.
BOB15 and Cable-BOB15. These are currently now in production and the pin out mapping on the board will be slightly different and picture will be updated once we receive them. Pins 2,3,5 (RS232 connection) are already tied to the Dsub 9 pin connector which will feedback to the PC serial (use a serial to USB converter if no serial port.
www.serialcomm.com/USB_adapters/USB_conv...ct_general_info.aspx
The new design layout will have 2, 5V out pins; 1 on each side (14, 14.2)
Left side will have 14.2(5V out), 15, 4, 8, 7, 6, 5
Right side of board will have 14(5Vout), 13, 1, 9, 10, 11, 12
dev.roboteq.com/dev1/index.php/roboteq-p...ssories/bob15-detail
dev.roboteq.com/dev1/index.php/roboteq-p...s/cable-bob15-detail
We are looking to make possible 2 breakout board designs.
1 for the HDC/HBL controllers that are the 25 pin and 9 pin connectors along with the RS232 out to PC
1 for the FBL/FDC controllers that have just a 25 pin connector.
Any suggestions on these new designs other than what is seen on the current BOB15 accessory?
BOB15 and Cable-BOB15. These are currently now in production and the pin out mapping on the board will be slightly different and picture will be updated once we receive them. Pins 2,3,5 (RS232 connection) are already tied to the Dsub 9 pin connector which will feedback to the PC serial (use a serial to USB converter if no serial port.
www.serialcomm.com/USB_adapters/USB_conv...ct_general_info.aspx
The new design layout will have 2, 5V out pins; 1 on each side (14, 14.2)
Left side will have 14.2(5V out), 15, 4, 8, 7, 6, 5
Right side of board will have 14(5Vout), 13, 1, 9, 10, 11, 12
dev.roboteq.com/dev1/index.php/roboteq-p...ssories/bob15-detail
dev.roboteq.com/dev1/index.php/roboteq-p...s/cable-bob15-detail
We are looking to make possible 2 breakout board designs.
1 for the HDC/HBL controllers that are the 25 pin and 9 pin connectors along with the RS232 out to PC
1 for the FBL/FDC controllers that have just a 25 pin connector.
Any suggestions on these new designs other than what is seen on the current BOB15 accessory?
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
Time to create page: 0.073 seconds
