1. Forum
  3. Roboteq Motor Controllers
  5. General Issues
  7. Spectrum radio interface to 2130

Spectrum radio interface to 2130

12 years 2 weeks ago #29525409 by Michael Burton
Spectrum radio interface to 2130 was created by Michael Burton
I have a 2130 without the connector for the Spectrum radio. If I add this connector on the pads labeled Spectrum will it function? Do I need an update to the firmware.

Please Log in or Create an account to join the conversation.

12 years 2 weeks ago #29525411 by roboteq
Replied by roboteq on topic Re:Spectrum radio interface to 2130
You will need to fit a connector and update the firmware. You will also need the latest version of Roborun.

Check that you have PCB version 1.2.

Please Log in or Create an account to join the conversation.

12 years 2 weeks ago #29525415 by Michael Burton
Replied by Michael Burton on topic Re:Spectrum radio interface to 2130
I have rev 1.2
Can you give me the connector information for the Spectrum radio so that I can purchase it locally and not wait for shipping?

Please Log in or Create an account to join the conversation.

12 years 2 weeks ago #29525419 by roboteq
Replied by roboteq on topic Re:Spectrum radio interface to 2130
Connector can be purchased from here

search.digikey.com/scripts/DkSearch/dksu...ail&name=455-1670-ND

Please Log in or Create an account to join the conversation.

12 years 2 weeks ago #29525421 by Michael Burton
Replied by Michael Burton on topic Re:Spectrum radio interface to 2130
Thanks, I will see if it is available at a local shop first.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
  1. Forum
  3. Roboteq Motor Controllers
  5. General Issues
  7. Spectrum radio interface to 2130
Time to create page: 0.067 seconds