Need a controller for 1V brushed dc motor

12 years 2 weeks ago #29526622 by Anonymous
I am looking for a controller to control x 1v dc brushed motors. It must have a continuous rating of about 30Amps and a max of at least 80Amps. It must also be radio controlled (868Mhz). There must also be fail-safe features on the controller. Is this something you could provide?

Please Log in or Create an account to join the conversation.

12 years 2 weeks ago #29526623 by Roboteq
Replied by Roboteq on topic RE: Need a controller for 1V brushed dc motor
We make several controllers, covering a wide range of motor current. All our controller can be driven remotely via radio transmitter. If I understand correctly you have one motor only, which I assume is permanent magnet.
In this case you should be able to use our AX1500SC. If you can send the data sheet of the motor to This email address is being protected from spambots. You need JavaScript enabled to view it. it will help.
Otherwise we would need the battery voltage of the motor and the series resistance to make sure this controller can do the job.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.275 seconds