Need a controller for a wheelchair

15 years 3 weeks ago #29526624 by Anonymous
Need a controller for a wheelchair was created by Anonymous
I am interested in a product that could help me with my project - a wheelchair. The wheelchair has two motors, the technical specification of the motors:
24 vdc
park brake 24 v
power output 230 w
max torque 55 NM
No-load current 3.3 A
Output shaft speed 120 rpm
gear ratio 3:88:1
speed 7 km/hr
weight 5.5 kg
I want to know which controller suitable to that wheelchair?

Please Log in or Create an account to join the conversation.

15 years 3 weeks ago #29526625 by Roboteq
Replied by Roboteq on topic RE: Need a controller for a wheelchair
A 230 Watt output motor at 24 Volt will require at least 12 Amp continuous current to operate. In this case the right controller is the AX1500

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.049 seconds