mg1600 question
8 years 5 months ago #29529745
by anavarro
mg1600 question was created by anavarro
Hi
I'm creating an autonomous veicle for a manufacturing plant, in this plant I cant set the tipical magnetic line, for this i'm going to set "TAGS" only a flags to correct the trajectory of the veicle and do spins, my cuestion is, can i place the sensor (mg1600) upside down? this is because testing the sensor i can see a conduct that benefits me.
thanks.
I'm creating an autonomous veicle for a manufacturing plant, in this plant I cant set the tipical magnetic line, for this i'm going to set "TAGS" only a flags to correct the trajectory of the veicle and do spins, my cuestion is, can i place the sensor (mg1600) upside down? this is because testing the sensor i can see a conduct that benefits me.
thanks.
Please Log in or Create an account to join the conversation.
8 years 5 months ago #29529746
by TechSupport
Replied by TechSupport on topic mg1600 question
There shouldn't be any problems with placing the sensor upside down. It will still read the magnetic tape. Just make sure that the polarity of the tape is correct both physically and in the sensor configuration data. North side top/ South side bottom.
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
Time to create page: 0.053 seconds
