USB Mode Stuck _ ASAP

5 years 5 months ago - 5 years 5 months ago #29530845 by buchjyot
The device is stuck in a loop and won't connect to the USB. Short circuiting the RS232 TX and RX pins didn't help.

How can we get the device connect to the computer again?

It is the DC motor controller - HDC2450

Please Log in or Create an account to join the conversation.

5 years 5 months ago #29530847 by TechSupport
Replied by TechSupport on topic USB Mode Stuck _ ASAP
The self test function is no longer available in our firmware, and that information regarding the shorting of the Rx and Tx will be removed from the datasheets soon.

It sounds like you wrote a script that was faulty and had set the script to autostart. If this is the case, then try the steps in the following link.

dev.roboteq.com/dev1/index.php/support/s...-but-never-stablizes

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.142 seconds