HBL2360

8 years 2 months ago #29530905 by Abaglin
HBL2360 was created by Abaglin
Please Help!!!

I am attempting to build an AGV with the HBL2360. I have been trying to get some movement out of my motors but they will not budge. I have followed the online tutorials on the open loop configuration and several other tutorials but I have yet to get the motors to move.

I have the motor controller hooked up to the PC through the USB connection the VMot attached to the contactor for the 36V system and have done every combination possible to get the right polarity but I still can not get the motors to move. I am only when I power the motors through Roborun+ I only receive 6V to each of the phase wires.

any suggestions??

Please Log in or Create an account to join the conversation.

8 years 2 months ago #29530907 by TechSupport
Replied by TechSupport on topic HBL2360
You'll want to be hooked up via serial and not usb as it is not a reliable connection for communication.

Secondly, is your hall sensors connected?

www.youtube.com/embed/9AkgJGngx3E?wmode=...toplay=1&fs=1&start=

Regarding AGV.

dev.roboteq.com/dev1/index.php/applicati...tic-track-guided-agv

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.051 seconds