1. Forum
  3. Roboteq Motor Controllers
  5. General Issues
  7. MDC2230 windows 8.1

MDC2230 windows 8.1

7 years 8 months ago #29531517 by MDC2230
MDC2230 windows 8.1 was created by MDC2230
Hello all (after proper uninstall) I re-installed the Roborun+ software after connecting the controller and having all the driver issues on windows 8.1, and then booted the program and it wont start and only throws the error code as seen in the provided pictures. computer information and specs attached in second picture as well. looking forward to some input thanks in advance.
Attachments:

Please Log in or Create an account to join the conversation.

7 years 8 months ago - 7 years 8 months ago #29531519 by niko
Replied by niko on topic MDC2230 windows 8.1
Hello,

please follow the steps below:

- Extract the attached .rar file (rename .ra_ into .rar).
- Copy strip.ocx file to C:\windows\system32 directory.
- Run cmd as administrator.
- In the command prompt window navigate to the system32 folder:
cd c:\windows\system32
- Register the ocx:
regsvr32 /i strip.ocx
- Try run the application.

Let me know if the problem persists.

File Attachment:

File Name: ChartOcx.zip
File Size:93 KB
Attachments:

Please Log in or Create an account to join the conversation.

7 years 7 months ago #29531687 by MDC2230
Replied by MDC2230 on topic MDC2230 windows 8.1
Sorry for taking so long to reply had to pack up the project due to work for a few weeks, ran the file as suggested and was greeted with this error code as included in picture. Thanks again!!
Attachments:

Please Log in or Create an account to join the conversation.

7 years 7 months ago #29531690 by niko
Replied by niko on topic MDC2230 windows 8.1
The process I gave you is supposed to fix this issue as well.

Do you have 64bit Windows?

If so please consider the following instructions for 64 bits windows:
- Extract the attached .rar file (rename .ra_ into .rar).
- Copy strip.ocx file to C:\windows\SysWOW64\ directory.
- Run cmd as administrator.
- In the command prompt window navigate to the SysWOW64 folder:
cd C:\windows\SysWOW64\
- Register the ocx:
regsvr32 strip.ocx

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
  1. Forum
  3. Roboteq Motor Controllers
  5. General Issues
  7. MDC2230 windows 8.1
Time to create page: 0.067 seconds