getting real time Amps readouts
7 years 6 months ago #29531786
by gg
getting real time Amps readouts was created by gg
I need to have a display with real-time amps (motor or battery) being read out during operation. One way to do it is to install a hall-based current sensor and read the amps with a separate voltmeter.
But is there a way to do it without installing additional sensors? If it has to be something no less than a microcomputer, can you suggest some simple and cheap models? Thanks.
But is there a way to do it without installing additional sensors? If it has to be something no less than a microcomputer, can you suggest some simple and cheap models? Thanks.
Please Log in or Create an account to join the conversation.
7 years 6 months ago #29531790
by niko
Replied by niko on topic getting real time Amps readouts
Our controllers can output their data either via CAN or via RS232/USB.
Furthermore you could use douts with the help of scripting, but that would increase the complexity a lot.
We can suggest our IO extender RIO which has to analog outputs and can easily communicate with any of our controllers via CAN (using RoboCAN).
Furthermore you could use douts with the help of scripting, but that would increase the complexity a lot.
We can suggest our IO extender RIO which has to analog outputs and can easily communicate with any of our controllers via CAN (using RoboCAN).
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
Time to create page: 0.051 seconds
