FBL2360 status led not in documentation
- Ferrentino
- Topic Author
- Offline
Less
More
- Posts: 6
- Thank you received: 0
5 years 11 months ago #29532952
by Ferrentino
FBL2360 status led not in documentation was created by Ferrentino
I'm using FBL2360 since one year.
On the unit now in my hand I have status led green blinking one flash red and cannot decode this status in documentation.
It's connected by usb cable to a PC, and I cannot connect Roborun.
Could you help me please?
Thanks.
Paolo
On the unit now in my hand I have status led green blinking one flash red and cannot decode this status in documentation.
It's connected by usb cable to a PC, and I cannot connect Roborun.
Could you help me please?
Thanks.
Paolo
Please Log in or Create an account to join the conversation.
5 years 11 months ago #29532954
by blake
Replied by blake on topic FBL2360 status led not in documentation
Hello Paolo,
I'm not quite clear as to what the flash pattern is from your description. Please send a video so that we can see
I'm not quite clear as to what the flash pattern is from your description. Please send a video so that we can see
Please Log in or Create an account to join the conversation.
- Ferrentino
- Topic Author
- Offline
Less
More
- Posts: 6
- Thank you received: 0
5 years 11 months ago #29532955
by Ferrentino
Replied by Ferrentino on topic FBL2360 status led not in documentation
Here is the video. I'm sorry for quality.
Thank You Blake.
Paolo
Thank You Blake.
Paolo
Please Log in or Create an account to join the conversation.
5 years 11 months ago #29532962
by roboteq
Replied by roboteq on topic FBL2360 status led not in documentation
This is an unkown pattern.
If possible, try to connect the controller to a PC via the COM port and report what you see on a terminal emulation window (e.g. hyperterminal, real-term, ....)
COM port always works and it is usually possible to recover if it is a problem related to firmware fault.
Try also to power the controller via the Power Control wire.
If possible, try to connect the controller to a PC via the COM port and report what you see on a terminal emulation window (e.g. hyperterminal, real-term, ....)
COM port always works and it is usually possible to recover if it is a problem related to firmware fault.
Try also to power the controller via the Power Control wire.
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
Time to create page: 0.058 seconds
