MGS1600GY HELP ME

I HAVE BOUGHT TWO MGS1600GY BUT NOW THE FIRST THAT I HAVE BOUGHT WORK GOOD BUT THE SECOND THAT I HAVE INSTALLED WORK NOT GOOD
ANYONE KNOW WHY?

I HAVE JUST SELECT THE PULSE 1 AND PULSE 2 CHANNEL RESPECTEVLY MGS1600GY (1) PULSE 1 , MGS1600GY (2) PULSE 2 , AND I WORK WITH ONE MAGNETIC BAND AT A TIME SO WHEN I USE THE FIRST BAND I DESELECT THE PULSE 2 , IF I WORK WITH THE SECOND MAGNETIC BAND I DESELECT THE PULSE 1 ..... BUT THE MAGNETIC BAND DONT WORK GOOD

Can you clarify what you mean by not working well? Do you see values coming from it and they are wrong, or are you unable to see any value from the sensor when you have the pulse input enabled?

I am also not sure what you mean when you say "select" a pulse channel. You should be able to leave both pulse inputs configured to accept MGS pwm input and then check which one you need from Microbasic. Let me know a little more about what is going wrong.

my problem is that i use two mgs1600gy for build an avg.

i use one magnetic band for the forward and one for the backward ,
the latter does not work like the first one, for example I need to have two of the tags reconverted to that band but I do not know the reason, while with the other one, it sees them once and executes the instructions that I give them

Did you make sure that the second sensor is calibrated correctly? You should be able to calibrate the sensor from our magsensor utility.