Mistake in the Datasheets FBL2360/SBL2360 Molex Pinout

3 years 11 months ago #29534784 by petros_arrival

I have noticed on the datasheets for FBL2360/SBL2360 the pin1 locations is opposite of what Molex defines as pin1. If someone uses an off-the-shelf cable assembly they might end up with a short 5V to GND. You should fix that:
See attachment for comparison

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.044 seconds