Slow Modbus TCP

5 months 52 minutes ago #29534996 by SeMi
Slow Modbus TCP was created by SeMi
Hi,
I am using the ModbusTCP interface for the first time on a FBL2360E controller and experiencing a really slow response rate.
Please find attached a log with highlited rows of one query to the controller where you can see:
1.    No.3: query to controller
2.    No.6: ACK from controller ~56ms later
3.    No.11: answer from controller ~111ms later

This happens with every query and gives us a transmission rate of around 7Hz for all queries. This is simply insufficient for our application. Is there something I can do to minimize the response time of the controller or do I need to change interface?

regards, Sergio
Attachments:

Please Log in or Create an account to join the conversation.

4 months 1 week ago #29535017 by george_f
Replied by george_f on topic Slow Modbus TCP
Hello SeMi
This is not usual to Roboteq's controllers, i agree that it is very slow response.
I suggest to send only a query to the controller without anyting else (script, etc) and see the responses there.
If the response rate is good then you can strat building up the other functions of the application
Als it is not something to customize so we must follow that procedure to investigate.
If the response is slow again then i suppose that is something hardware.
Please try and let me know.

Please Log in or Create an account to join the conversation.

3 weeks 21 hours ago #29535205 by adic
Replied by adic on topic Slow Modbus TCP
Hi Semi, i'm trying to establieh Modbus TCP communication in my FBL2360TE, how did you manage to do that? could you guide me please in the required steps?

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.197 seconds