Firmware update for the AX2500

15 years 6 months ago #3051528 by Explorer3
Firmware update for the AX2500 was created by Explorer3

Hello.

Could I update my old AX2500 with the current "<FONT face=Arial>version 1.5a, May 22, 2004" firmware from the ROBOTEQ website or it won't work? It's now clear and I don't want to fall in a dead end...</FONT>
<FONT face=Arial></FONT>
<FONT face=Arial> If it does not work, where could I get the latest firmware version for it?</FONT>
<FONT face=Arial></FONT>
<FONT face=Arial> I bought the controller from e-Bay from a guy who never even tried it since he has it so it's a old version.</FONT>
<FONT face=Arial></FONT>
<FONT face=Arial> When I query the controller for the current, it is always giving me back ZERO for the measure... I am curious to see if the new firmware solves that...</FONT>

Please Log in or Create an account to join the conversation.

15 years 6 months ago #3053393 by cosma
Replied by cosma on topic Re:Firmware update for the AX2500
The latest software revision that will work on the AX2500 is v1.3. It may be downloaded at <A href=" dev.roboteq.com/dev1/download/robosetup13.zip " target=_blank> www.roboteq.com/download/ robosetup13.zip
<U><FONT color=#0000ff></FONT></U>
Regarding the Amps reading, the sensors are there to measure high current (to over 120A). It is possible that the controller will report 0 if you have only a few amps flowing (1 to 3). Accuracy improves at higher currents.


Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.086 seconds