- Forum
- Roboteq Motor Controllers
- Controller Configuration & Operation
- MBL1650 acceleration & deceleration setting
MBL1650 acceleration & deceleration setting
10 years 4 months ago #29528070
by Herman
MBL1650 acceleration & deceleration setting was created by Herman
I have a powerfull application where quick acceleration / deceleration is needed. The BLDC motor, power supply and load could handle this but the acceleration/deceleration is limited by the MBL1650 controller.
Is it possible to disable the acceleration / deceleration limiter ?
My settings are:
closed loop speed
optical encoder 1000 pulses/rev
Max speed 3000 RPM
Acceleration 50000 RPM/s
Deceleration 50000 RPM/s
(50000 RPM/s is the max setting)
This means that the controller will go in 60ms from 0 to 100% power. The control loop is operating at 200Hz/5ms, this is far more faster. The dynamic performance in this case is mainly determined by the acc/decel limiter.
Thank you for your help.
Is it possible to disable the acceleration / deceleration limiter ?
My settings are:
closed loop speed
optical encoder 1000 pulses/rev
Max speed 3000 RPM
Acceleration 50000 RPM/s
Deceleration 50000 RPM/s
(50000 RPM/s is the max setting)
This means that the controller will go in 60ms from 0 to 100% power. The control loop is operating at 200Hz/5ms, this is far more faster. The dynamic performance in this case is mainly determined by the acc/decel limiter.
Thank you for your help.
Please Log in or Create an account to join the conversation.
9 years 10 months ago #29528591
by chelijan
Replied by chelijan on topic MBL1650 acceleration & deceleration setting
HELLO,
Use MBL1650C situation I talk to you about, you can try to limit current in the biggest try. In addition, please you use MBL1650C? CANBUS communications can use?
Use MBL1650C situation I talk to you about, you can try to limit current in the biggest try. In addition, please you use MBL1650C? CANBUS communications can use?
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
- Forum
- Roboteq Motor Controllers
- Controller Configuration & Operation
- MBL1650 acceleration & deceleration setting
Time to create page: 0.059 seconds