SBL1360 analog input range changed

It looks pin 24 and 25 are shorted on the mcu. These pins have zero ohm to R38/R46 and R33/R42 ??

24 and 25 are also ain5 and ain6. ain5 goes to 24 and 61. ain6 goes to 25 and 62

Look very closely to see if there is solder across these two sets of pins.

contact This email address is being protected from spambots. You need JavaScript enabled to view it. to arrange for a warranty replacement.

I will take the controller to a SMD workstation with a microscope. Have a look if there is a real shortage and see if it can be reworked.

Maybe they have a camera on the microscope, I can take a photo and sent it to you.

There is a shortage between pin 24/25 on the mcu. I removed the shortage and the impedances are OK now. Send a photo to customer service.