HDC2450 operating via TCP/IP

6 years 9 months ago #29528382 by harena
Hi Guys,
I have a question, how is it possible to operate the HDC2450 via TCP/IP? I saw that the AX500 supports via RoboServer this option but could not find anything for the HDC2450.

My configuration is following I have a mobile platform with a HDC2450 Controller directly connected with an Embedded PC (on the platform) via RS232. On the Embedded PC I run Roborun, I have also an Logitech Gamepad connected on the Embedded PC. Everything works so OK.
Now I would like to have additional Laptop as a basis station closer to the operator where I could monitor the stat of the robot via Robotrun and send also commands via the Gamepad. In this way I would also increase the distance from the operator to the mobile platform. Could anybody give me some advice how to achieve this?

Thanks!

Please Log in or Create an account to join the conversation.

6 years 9 months ago #29528383 by Griffin Baker
Replied by Griffin Baker on topic HDC2450 operating via TCP/IP
Though we have not verified that this suggestion works, you may want to try finding something like this.

www.taltech.com/tcpcom?gclid=CMXG05na0rkCFSTJtAodCkQAzA

Please Log in or Create an account to join the conversation.

6 years 9 months ago #29528415 by harena
Replied by harena on topic HDC2450 operating via TCP/IP
Thanks for the tip but unfortunately I could not get it running. Please have a look on my configuration, maybe it would be better to understand. On my mobile platform I have directly connected the HDC2450 and the Embedded PC via RS232. On the Embedded PC I run some apps. for my sensor system. Now I would like to run the Roborun+ from the base station and control the mobile platform. I would like to have an joystick on the base station also. On the base station I will have some other apps also. Thanks for any help.
Best regards,
harena
Attachments:

Please Log in or Create an account to join the conversation.

6 years 9 months ago #29528417 by Griffin Baker
Replied by Griffin Baker on topic HDC2450 operating via TCP/IP
What specifically isn't working?

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.198 seconds