Pinout Button not Highlighted

8 years 11 months ago #29528896 by ombra
Replied by ombra on topic Pinout Button not Highlighted
many thanks for the reply,
but for my application does not use serial communication,
I just need the pinout button to enable a digital input (DI3 pin 12) which is to defaut is "unused"

Please Log in or Create an account to join the conversation.

8 years 11 months ago #29528897 by nmsr1196

Please Log in or Create an account to join the conversation.

8 years 11 months ago #29528898 by ombra
Replied by ombra on topic Pinout Button not Highlighted
in the "SBL13xx Motor Controller Datasheetdatashe" is written " The controller can be configured so that practically any Digital, Analog and RC pin can be used for any purpose."

Now, if I open roboburn +
and I select the controller

SBL1360 in offline mode, the button "pinout" is not active.
..if i try with another controller, button pinout works.

I think there is a bug in roboburn+ whith SBL13xx

Thanks for your cooperation

Attachments:

Please Log in or Create an account to join the conversation.

8 years 11 months ago #29528899 by roboteq
Replied by roboteq on topic Pinout Button not Highlighted
This is an omision in Roborun that we will need to fix.

Note that this button serves only to view the pinout in a convenient way. It does not change the way the controller operates or what pin can be configured.

Please refer to the product datasheet for the connector pinout.

Please Log in or Create an account to join the conversation.

8 years 11 months ago #29528900 by ombra
Replied by ombra on topic Pinout Button not Highlighted
very bad,
many thanks anyway for fast response...

Please Log in or Create an account to join the conversation.

8 years 11 months ago #29528901 by nmsr1196
Yes possibly. sounds like it. Hopefully the folks at RoboteQ can solve the issue.
I have the 22xx model.

Please Log in or Create an account to join the conversation.

8 years 11 months ago #29528902 by nmsr1196
Try unchecking the "Work Offline".

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.082 seconds