Automatic Query
9 years 9 months ago #29528646
by rajeshwar
Automatic Query was created by rajeshwar
I am using MDC2230C. I tried to get feedback from the drive using Telemetry (^TELS "?A:#100" ). I saved the configuration into the EEPROM using %EESAV. After I reset the power, I was hoping to get the response from drive at every 100ms as mentioned in the user manual, but I am getting the result only once. Why?
Please Log in or Create an account to join the conversation.
- roboteq
9 years 9 months ago #29528647
by roboteq
Replied by roboteq on topic Automatic Query
try adding a : at the end of the string:
TELS "?A:#100:"
TELS "?A:#100:"
Please Log in or Create an account to join the conversation.
9 years 9 months ago #29528661
by rajeshwar
Replied by rajeshwar on topic Automatic Query
Thanks for the response. but adding ':' did not help. There has to be a space between '#' and the time delay (100ms in this case). But in the user manual it is written as a continuous string.
This happened because there are a lot of typos in the user manual. I would request Roboteq documentation team to look into those errors and correct it. I have already sent a mail few weeks ago mentioning few of the error which I could find.
This happened because there are a lot of typos in the user manual. I would request Roboteq documentation team to look into those errors and correct it. I have already sent a mail few weeks ago mentioning few of the error which I could find.
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
Time to create page: 0.054 seconds