Output voltage HDC2450

9 years 5 months ago #29529029 by Beginner
Hi,

I'm am using HDC2450 and I've looked through the manual "nxtgen_controllers_userman". In "Run tab" , I don't see a Chart Recorder for "output voltage". But I see "motor power". I want to know the value of voltage applied on my motor. My motor is 18 VDC. I don't want to exceed this voltage. My input voltage is 12 V.

Thanks

Please Log in or Create an account to join the conversation.

9 years 5 months ago #29529030 by Griffin Baker
Replied by Griffin Baker on topic Output voltage HDC2450
If your input voltage is only 12V, then the maximum voltage that can be seen at the output is what is put in(Unless your power supply/battery is causing for voltage spikes). The controller does not create additional voltage.

Please Log in or Create an account to join the conversation.

9 years 5 months ago #29529031 by Beginner
Replied by Beginner on topic Output voltage HDC2450
Thanks for your answer. For my motor (18 V), my input voltage must be between 20 V and 50 V DC ? I have a other question : How do I display value of output voltage in "Run tab" ?

Please Log in or Create an account to join the conversation.

9 years 5 months ago #29529032 by Griffin Baker
Replied by Griffin Baker on topic Output voltage HDC2450
The controller is rated for a voltage to a max of 50V.

There isn't currently a output voltage query. The 3 voltages that the roborun+ will query are the following.

vdr = internal voltage in Volts *10
vmot = main battery voltage in Volts *10
v5out = 5V output on DSub connector in millivolts.

Page 186 User manual.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.058 seconds