firmware fail...

4 years 11 months ago #29531312 by hass
firmware fail... was created by hass
I am trying to update the firmware on my controller(FBL2360).
Its not working.
Please send to me older version firmware?

log :

Checking file: C:\Users\hass\Downloads\FBL2XXX-Firmware-Update-v14b-033115 (12)\FBL2XXX-Firmware-Update-v14b-033115.bin
Passed.

Searching for device...
Checking COM4...device found.

Controller found on COM4.
Resetting the controller...done.
Waiting for device restart...done.
Requesting programming mode...done.
Waiting enter programming mode...done.
Using FBL2XXX-Firmware-Update-v14b-033115.bin
Checking device...waiting for firmware file.
Uploading firmware file...
Win32 WSC Version 4.4.0.
COM4 reset.
XYM Version 3.2.0.
Starting YMODEM Send...
Opening file C:\Users\hass\Downloads\FBL2XXX-Firmware-Update-v14b-033115 (12)\FBL2XXX-Firmware-Update-v14b-033115.bin
File size: 68,880 bytes.
XYM 3.2.0 (1)
70 packets transfered.
Checking device...programming completed.
Checking firmware...error.
New firmware message not detected.

Please Log in or Create an account to join the conversation.

4 years 11 months ago #29531314 by TechSupport
Replied by TechSupport on topic firmware fail...
The comport bin file update only works if you are connected via RS232. If you are connected via USB, then the update is via USB.

If you are using RS232, then try the method in the link below.

dev.roboteq.com/dev1/index.php/support/s...update-or-in-general

Please Log in or Create an account to join the conversation.

4 years 11 months ago #29531320 by hass
Replied by hass on topic firmware fail...
I connected FBL2360 with PC by RS232 to USB cable and tried to update but it didn't work.

I like to know the released version firmware from your factory.
Actually, as soon as I updated the new firmware from your website.
Anyway Could you send me the previous version firmware which is stable by mail?

Please Log in or Create an account to join the conversation.

4 years 11 months ago #29531324 by roboteq
Replied by roboteq on topic firmware fail...
If the controller worked after the firmware update, this means the updating worked even though you got an error message at the end.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.157 seconds