1. Forum
  3. Roboteq Motor Controllers
  5. Controller Configuration & Operation
  7. Encoder PPR requirement?

Encoder PPR requirement?

7 years 9 months ago #29531495 by aaqilkhan
Encoder PPR requirement? was created by aaqilkhan
1. What encoder PPR is most suitable for the XDC2460 controller. My motors rated speed is 250rpm.
The last time I used a gear motor with the SDC controller, it didn't work because of low counts.

2. Can someone suggest a good encoder to install on the NPC-T74 motors?

Please Log in or Create an account to join the conversation.

7 years 9 months ago #29531496 by niko
Replied by niko on topic Encoder PPR requirement?
Hello,

Since you want to have a motor running in low speeds (250rpm), we would suggest use an encoder with 2000ppr (8000cpr) in order to have optimal resolution.
The following user(s) said Thank You: aaqilkhan, israr

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
  1. Forum
  3. Roboteq Motor Controllers
  5. Controller Configuration & Operation
  7. Encoder PPR requirement?
Time to create page: 0.057 seconds