- Forum
- Roboteq Motor Controllers
- Controller Configuration & Operation
- Does the HBL1672 CanOpen support SYNC?
Does the HBL1672 CanOpen support SYNC?
6 years 6 months ago - 6 years 6 months ago #29532287
by blue9
Does the HBL1672 CanOpen support SYNC? was created by blue9
We use the SYNC feature in our CAN bus architecture.
Does the CanOpen implementation on HBL1672 support this?
We also need to send TPDOs in multiples of the SYNC pulse. Is that supported?
This is a standard CanOpen feature for motor controllers.
Thanks!
Does the CanOpen implementation on HBL1672 support this?
We also need to send TPDOs in multiples of the SYNC pulse. Is that supported?
This is a standard CanOpen feature for motor controllers.
Thanks!
Please Log in or Create an account to join the conversation.
6 years 6 months ago #29532289
by niko
Replied by niko on topic Does the HBL1672 CanOpen support SYNC?
Hello,
Unfortunately, currently all TPDOs are configured as asynchronous and are initiated tight away the configuration of CANOPEN. THerefore the transmission type cannot be changed using the repsective SDO and thus the SYNC feature is not working as it should.
In order to fix this, firmware modification is neccesary. Please let us know what is your issue and why you need SYNC in order to figure out a workaround.
Unfortunately, currently all TPDOs are configured as asynchronous and are initiated tight away the configuration of CANOPEN. THerefore the transmission type cannot be changed using the repsective SDO and thus the SYNC feature is not working as it should.
In order to fix this, firmware modification is neccesary. Please let us know what is your issue and why you need SYNC in order to figure out a workaround.
Please Log in or Create an account to join the conversation.
Moderators: tonysantoni
- Forum
- Roboteq Motor Controllers
- Controller Configuration & Operation
- Does the HBL1672 CanOpen support SYNC?
Time to create page: 0.067 seconds
