HPO / HSM setup

2 years 5 months ago - 2 years 5 months ago #29533455 by Gabriel_Isko
Replied by Gabriel_Isko on topic HPO / HSM setup
This command should work on the HBL2396. We aim to provide new firmware on a bi-annual release cycle. I will follow up with engineering about how to handle 60 degree hall sensors on the SBL1360.

Please Log in or Create an account to join the conversation.

2 years 4 months ago #29533524 by atestasecca
Replied by atestasecca on topic HPO / HSM setup
Hi Gabriel

The controller HBL2396 is not available in a short time (production delayed) and I need urgently a controller with one or two channels with 20A continuous ,a max voltage of 60V and that can support 60° hall sensors.

Can you check with the engineering if there is another controller that can be suitable for my application?

Thanks in advance for the help

Please Log in or Create an account to join the conversation.

2 years 4 months ago #29533525 by Gabriel_Isko
Replied by Gabriel_Isko on topic HPO / HSM setup
Is it possible you can reduce you power supply voltage? The FBL2360 should do well in this application as long as you never supply with more than 60V (you are going to want to give it some room between it's max rating and the voltage of your power supply).

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.090 seconds