HDC2460 Digital Ouputs

2 years 1 month ago #29533985 by tdollar
Hello,

I couldn't seem to find any information in the datasheet about the output voltage on the digital outputs for the HDC2460 controller. On the DSUB25 connection are the pins outputting the same voltage as the incoming control power (in this case, it's 24VDC) or are they outputting at 5VDC? The pins I'm referring to are:

DOUT1 - Pin 18
DOUT2 - Pin 6
DOUT3 - Pin 19
DOUT4 - Pin 7
DOUT5 - Pin 20
DOUT6 - Pin 8

Please Log in or Create an account to join the conversation.

2 years 1 month ago #29533986 by Gabriel_Isko
Replied by Gabriel_Isko on topic HDC2460 Digital Ouputs
Our digtal outputs do not output current. Instead they act as open drain transistors to ground. Their function and the internal circuit they use are documented in our User Manual .

Please Log in or Create an account to join the conversation.

1 year 11 months ago #29534112 by agunduz
Replied by agunduz on topic HDC2460 Digital Ouputs
In the FDC3260 datasheet it says: "Four general purpose 24V, 1.5A output for brake release or accessories"

These general purpose outputs are the digital outputs, right?

Please Log in or Create an account to join the conversation.

1 year 11 months ago #29534125 by Gabriel_Isko
Replied by Gabriel_Isko on topic HDC2460 Digital Ouputs
Yes, that's right.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.108 seconds