How to configure Digital Output to High when booting up

Digital Outputs seem to be Low by default for HDC2450. My application triggers action when the active level is Low. Even though I set theses Digital Output to be High in my script and enabled the script to auto-start, there was a brief moment where the Digital Output is Low before the script is executed, which leads to unwanted actions when booting up HDC2450. Is there a way to configure these Digital Outputs to High when booting up? Thanks

Unfotunately, there is no way because the output transistors require power to be activated and close the output circuit. You will have to wait for the digital outputs to activate after bootup to start your application, unfortunately.

Got it. Thank you for your prompt response.