canOpen datapoints returning 0

3 months 6 days ago #29535622 by luke_the_sw_guy
Hello,

we are having problems with fbl2360te (FW 2.1) communicating over canOpen. Some datapoints return 0 despite defined in datasheet.
According to datasheet of particular controller, current is measured on motor side, and then recalculated to the current on battery side.
We tried to read current on motor side over canOpen datapoint (0x2100.01), but we always got 0, but if we read recalculated current form battery side, we get some values.
We were also unsuccessful reading MCU temperature over datapoint 210F (Always 0).

Are there any settings, that aren't mentioned in datasheet, or do we need to do SW update ? 

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.071 seconds