1. Forum
  3. RIO I/O Expansion Card and Navigation Computer
  5. I/O Connection and Processing
  7. Outputs not stable?

Outputs not stable?

8 years 10 months ago #29529201 by QuiXXotic
Outputs not stable? was created by QuiXXotic
I have an issue with unstable 17mA leds driven by 24V through the digital outputs. Recorded the leds and my complete test setup. Everything is serious automation products. Any ideas how i can solve this?

www.youtube.com/watch?v=20zZboY14vQ&feature=youtu.be

Please Log in or Create an account to join the conversation.

8 years 10 months ago #29529202 by roboteq
Replied by roboteq on topic Outputs not stable?
If possible, try a different Raspberry board. We have seen the case once where this would happen.

If stable with another RPI, this will give us some clues.

Please Log in or Create an account to join the conversation.

8 years 10 months ago - 8 years 10 months ago #29529203 by QuiXXotic
Replied by QuiXXotic on topic Outputs not stable?
So now i got it running on another raspberry board. Still have the same issue but not the same pattern on the "flashing"!

Please Log in or Create an account to join the conversation.

8 years 10 months ago #29529219 by tony@g-eye.com
Replied by tony@g-eye.com on topic Outputs not stable?
have you tried a bigger power supply for the Raspberry PI that is not overclocked?

Please Log in or Create an account to join the conversation.

  1. Forum
  3. RIO I/O Expansion Card and Navigation Computer
  5. I/O Connection and Processing
  7. Outputs not stable?
Time to create page: 0.078 seconds