CAN IO

Thanks - I'll return both my cards. Much appreciated - great service guys !

Will probably be ordering more cards in the future

Hi
USB cards received, many thanks. I have a couple of questions

1. Using the RIO Configuration Utility. The button to Update Sensor Firmware via USB is disabled. Updating via COM port fails at restarting the RIO card.

2. Without updating firmware if I enable RawCAN comms is lost.

Current firmware version v1.3 03/17/2014

I've attached a revised xml file for you to upload and overwrite into your tree directory to allow you to update via usb.

C:/program files(x86)/Roboteq/NavSensor/Trees

Hi Thanks

From the RIO Configuration Utility
Select Yes to read sensor config
I selected Update Sensor Firmware via USB selecting OK when prompted that sensor will resart in USB DFU mode
DFU Loader Starts
There are no Available DFU and Compatible HID Devices from the combo box
I selected the Choose button to select RaspioF3-v13-update-061614.dfu
I pressed Upgrade
I pressed Yes when dialog stating Device was plugged in DFU mode continue
DFU Loader error is displayed, details below



AppName: dfuloader.exe AppVer: 1.0.0.0 ModName: stdfuprt.dll
ModVer: 2.2.0.0 Offset: 000019a4

If nothing available showed up in the box, then it means it has not installed the stm32 dfu drivers yet.

When you go into that mode, unplug the usb and plug it back in. Either it will attempt to install the drivers or it won't.

Open up device manager and see if anything shows up with a yellow icon next to it.

Thanks that worked.

Would it be possible to have an xml file with both :-

1. CAN Menu options
2. USB Sensor Firmware update

I'll take a look and see.

This will have to be fixed by someone else as I don't see an option to add it in myself. Thanks for your patience.

No problem.
I'll try reverting back to the old xml file when I have updated both cards.
Thanks