r2d2 built with dc motor controller from roboteqStar War's R2D2 has inspired a generation of engineers and engineers-to-be to poursue the field of Robotics. If you ever dreamed of having your own droid, this article will shows how you could.

By Chris James

This is an overview of how I integrated RoboteQ controllers into my replica R2-D2 project.

r2d2 robot and his creator

r2d2 robot during construction

Overview of the Project

Kids of all ages know and love R2-D2.  Since seeing Star Wars at an early age, I'd dreamed of having my very own droid.  After almost two years of hard work I have a full-size replica that looks and sounds like the original R2-D2.

There's no kit for building an R2-D2.  There are basic plans and components made by other fans and a community of builders from all over the world who are willing to help.  It's up to each individual to decide how to build their R2-D2, and everyone makes different choices.  My R2-D2 replica, is mostly made from aluminum, but I could have just as easily used wood or plastic.

People are sometimes surprised at how big he is.  Standing almost 3 feet tall and weighing close to 200lb, he is definitely in the league of some of the larger battle bot type robots some of you may have seen.  With that comes some challenges of getting him moving.

Building an R2 draws on knowledge from multiple disciplines, basic engineering to machining skills to electronics to painting.

The standing joke is that R2-D2 is a really badly designed robot -- he's not very stable, can be top heavy, has all sorts of stress and structural problem from his leg/shoulder design.  But our goal is to replicate the real R2 as closely as possible, flaws and all.

Some of the challenges with building such a heavy droid have been:

building r2d2 using roboteq dc motor controller

replica r2d2 robot built with dc motor controller from roboteq
r2d2 robot uses roboteq motor controller

  

Droid Components

In their simplest form, most mobile droids have the following basic components

In addition, a lot of builders strive to add as many gadgets as they can to mimic what the real R2-D2 had in the movies (and, yes, the jet propulsion was totally CGI).

replica robot and its components

robot periscope

  

building a robot

My droid has gone thru several iterations, which you can see in my blog and photo gallery, but in the current configuration he's using the following components:

Drive Motors: NPC Robotics - 2212 Drive Controller: RoboteQ FBL2360, Dome Rotation Motor: Pittman 9000 series Dome Controller: RoboteQ AX500 Batteries: 2 X 12V SLAs (18AH ea.)

building a robot with dc motor controller

building a robot - motherboard, motors, controller

I know that some people with lighter droids have successfully used the AX500 and AX1500 controller for the drive system.

Current run-time on the two 18AH SLA batteries is roughly 7 hours, but it can vary depending on terrain and distance traveled.

Wiring

The following schematic outlines the 3 main areas of my electronics setup:

wiring diagram robot

There's also a PDF version that maybe easier for printing.

Note: Every R2 Builder has a different approach to the electronics and has a different wiring setup.

Specific RoboteQ FBL2360 Setting

 

Control System

For control, I use a Futaba 10C coupled with a custom RF key coder that is used to trigger sounds and pre-programmed sequences.

control system for DIY robot

Most all functions are user operated, such as the drive system and dome rotation, but some of the gadgets are controlled by small discrete micro-processers (PIC/PICAXE)

Photos and Video

Having your very own R2-D2 is a lot of fun, and the combination of the RoboteQ and NPC-2212's in my drive system have been rock solid.

r2d2 replica robot

Full details on my build can be found on my blog at www.artoo-detoo.net, and if you'd like to connect with more R2 Builders then check out www.astromech.net