BMS10x0 Battery Management Systems
Roboteq’s BMS10x0 is a battery management and protection system for building cost-effective, ultra-efficient and high current power sources using low cost Lithium Polymer (LiPo), or Lithium Ion Phosphate (LiFePO4) battery cells. The BMS connects to an array of 6 to 15 battery cells at one end, and to a user load at the other. Precision voltage sensors monitor the voltage of every cell. Precise, built-in current sensors keep track of the current flowing in and out of the pack, maintaining an accurate image of the battery's State of Charge and State of Health. The BMS includes a separate connector for battery charger and has a built-in switch that will disconnect the load in case of overload, over or under voltage, or over temperature. The BMS will act as a programmable circuit breaker in case of short circuit or continuous overload. The BMS is highly configurable: Temperature limits, voltage thresholds, current overload levels can all be set and changed using a provided PC utility. Communication between the BMS and other system components can be done via USB, CANbus, RS485, PWM or Bluetooth (optional).
|BMS1040||40V, 100 Amps Management System for 6 to 10 Cells Lithium Ion Batteries||Product details|
|BMS1060||60V, 75 Amps Management System for 11 to 15 Cells Lithium Ion Batteries||Product details|
|BMS1060BT||60V, 75 Amps Management System for 11 to 15 Cells Lithium Ion Batteries. Bluetooth||Product details|
|BMS1040BT||40V, 100 Amps Management System for 6 to 10 Cells Lithium Ion Batteries. Bluetooth||Product details|