Menu

Topic-icon No Status LED pattern

More
8 years 8 months ago #29525675 by kiwi
No Status LED pattern was created by kiwi
Hi,
I have connected for the first time the AX1500SCBP and the Status LED is OFF, no blink at all. The Power LED is ON.

Vmot and PwrC are connected to the positive terminal of a 12V battery - GND to the negative terminal.

No motors are connected.

The 15 pin connector is not yet connected to PC (plan was to connect).

Is this a normal behavior? Did I overlook something?

Thanks,
Marek

Please Log in or Create an account to join the conversation.

  • roboteq
  • roboteq's Avatar
8 years 8 months ago #29525677 by roboteq
Replied by roboteq on topic No Status LED pattern
It is not normal but go ahead and connect to the PC. If you have no communication, the product would be damaged.

Please Log in or Create an account to join the conversation.

More
8 years 8 months ago #29525683 by kiwi
Replied by kiwi on topic No Status LED pattern
I connected to PC and the Status diode came up. Not sure yet does it work since I\'m having now problems with software.

The program closes during searching for device with the following error code: Run-time error \'13\' Type mismatch.

Please Log in or Create an account to join the conversation.

More
8 years 8 months ago #29525685 by kiwi
Replied by kiwi on topic No Status LED pattern
OK its communicating.
Software problem was solved.
The problem was raised at this forum:

dev.roboteq.com/dev1/online-forum/pc-sof...tch-error-13#1402433

Please Log in or Create an account to join the conversation.

More
7 years 8 months ago #29527217 by Lauriek
Replied by Lauriek on topic No Status LED pattern
Does anyone know what color led lights can legally be used as accents on a motorcycle?
I know that I\'ve seen people get pulled over at Bike Week for having red or blue led lights on their bikes, but I\'m wondering what colors are legal? Are white ones ok?


LED Bulbs led light bulbs led recessed lights dimmable

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.112 seconds
Go to top