Menu

Topic-icon MGS 1600Y - Problem to read right marker with command ?MGM

More
10 months 2 weeks ago - 10 months 2 weeks ago #29534499 by CharlesDias
Hello,

I have a problem to read the status of the right marker by command ?MGM. Follow the test that I made using the USB and RS232 connection:
- Without marker: MGM=0:0
- With left marker: MGM=1:0
- With right marker: MGM=0:0

I tried the command ?MGM 2 but the answer always was the same, MGM=0.

The level of voltage in the pins 9 and 11 are works correctly when the marker is detected. The LEDs in the sensor and the software TrackSensor Control Utility are works correctly when the marker is detected.

What's the problem? Thanks for the help!

The version of the Firmware is Roboteq v3.0 MGS1600 09/06/2018.

Please Log in or Create an account to join the conversation.

  • Gabriel_Isko
  • Gabriel_Isko's Avatar
10 months 2 weeks ago #29534500 by Gabriel_Isko
Please try ?M instead of ?MGM and let me know if that helps.

Please Log in or Create an account to join the conversation.

More
10 months 2 weeks ago #29534501 by CharlesDias
I'll try this other command but only Monday now. I'll answer you as soon as possible.

Thanks!

Please Log in or Create an account to join the conversation.

More
10 months 2 weeks ago #29534512 by CharlesDias
Hello Gabriel,

The command ?M works perfectly! I'm able to read the right and left marker now.

Thanks a lot!

Please Log in or Create an account to join the conversation.

More
8 months 2 weeks ago #29534624 by schintalapudi
Hi Gabriel, Have the MicroBasic aliases changed? If so, where can I find a complete reference of the aliases.

Please Log in or Create an account to join the conversation.

More
1 month 3 weeks ago #29534832 by DrZer
Hello, I have the same problem and the command ?M works perfectly; the problem is that my mgs1600gy is connected to a FBL2360 with multi_pwm so I can't query the markers from the FBL2360 console, because the ?M command is assigned to "Read Motor Command Applied". How can I solve this?

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.097 seconds
Go to top