Topic-icon 2550 with OOPics

  • Darrell
  • Darrell's Avatar Topic Author
14 years 8 months ago #4659473 by Darrell
2550 with OOPics was created by Darrell
Has anyone successfully used an OOPic with this controller? I have an OOPic-R and I'm beginning to think another controller may be easier as I've yet to get this to work. Granted, I've not had a ton of time but the two just aren't talking. Anyone with positive experience here would be appreciated.

Please Log in or Create an account to join the conversation.

14 years 8 months ago #4670207 by RickBrooks
Replied by RickBrooks on topic 2550 with OOPics
<P style="MARGIN: 0px">Darrell,
<P style="MARGIN: 0px">
<P style="MARGIN: 0px">We've had good luck with the BS2SX in our high school group.
<P style="MARGIN: 0px">
<P style="MARGIN: 0px">The command is:
<P style="MARGIN: 0px">SEROUT SPin, Bmode, ["!", RFWD, HEX2 127. CR ]
<P style="MARGIN: 0px">where
<P style="MARGIN: 0px">SPin = 16
<P style="MARGIN: 0px">Bmode = 24816 9600 baud, 7 bit, even polarity, inverted
<P style="MARGIN: 0px">RFWD = "B" can be a, A, b, B for motor selection and speed
<P style="MARGIN: 0px">and the 127 is the speed with 0 = stop and 127 = full speed
<P style="MARGIN: 0px">
<P style="MARGIN: 0px">Of course you must send new commands at least every second to keep the watch dog chained.
<P style="MARGIN: 0px">
<P style="MARGIN: 0px">We have two sumos working with this arrangement, the 150 pounder and the 75 pounder. They each took second in their classes at the National Robotics Challange, High School level this last April.
<P style="MARGIN: 0px"><A href=" " target=_blank> </A>
<P style="MARGIN: 0px">
<P style="MARGIN: 0px">Rick Brooks

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.138 seconds
Go to top