Menu

Topic-icon SBL1360 doesn't respond to CAN messages, and buffer seems to be empty

More
4 years 9 months ago #29530195 by Eugene
replaced , still getting the same problem

Please Log in or Create an account to join the conversation.

More
4 years 9 months ago #29530196 by TechSupport
if(canID <> 0) is the problem. You are checking the can id when you should be checking the pending frames.

if(pending <> 0)
The following user(s) said Thank You: Eugene

Please Log in or Create an account to join the conversation.

More
4 years 9 months ago - 4 years 9 months ago #29530197 by Eugene
wow, it works now , thank you very much,

although every print(pending) i saw, always was 0,
so its not very clear why that works.

edit : probably its because when usb is connected, CAN not received, and console doesn't keep old print statements

Please Log in or Create an account to join the conversation.

More
4 years 9 months ago #29530198 by TechSupport
You can't use the USB when running can bus. It resets the can settings. You must use RS232.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.163 seconds
Go to top