Menu

Topic-icon Error 2360 overheating

More
4 years 2 months ago #29531291 by TechSupport
Replied by TechSupport on topic Error 2360 overheating
The Roborun detects all status faults, so ignore the status led.

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #29531292 by vit
Replied by vit on topic Error 2360 overheating
We have found a contact on the PCB which fell away
Contact was poorly done
he was responsible for the temperature
to update the firmware you write that there are no problems with the temperature error
can I have the old firmware controller?

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #29531293 by TechSupport
Replied by TechSupport on topic Error 2360 overheating
There have not been any changes to the temperature in the firmware so going backwards in firmware date isn't going to fix that.

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #29531294 by vit
Replied by vit on topic Error 2360 overheating
the controller has to work if  connect only one motor?

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #29531295 by vit
Replied by vit on topic Error 2360 overheating

TechSupport wrote: There have not been any changes to the temperature in the firmware so going backwards in firmware date isn't going to fix that.


1.4b 03/31/2015
- MCU overheat error no longer sticks

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #29531296 by TechSupport
Replied by TechSupport on topic Error 2360 overheating
3/31/2015 is the latest firmware as of current. So no idea why you would have something newer unless we personally sent out a different firmware for you to try out to resolve an issue.

To answer your other question, a dual channel controller such as the one you have can run or 2 motors. Since you didn't specify which controller model, I won't assume which controller you have other than it being 1 of 3; FBL2360, HBL2360, or VBL2360(Obsolete).

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #29531297 by vit
Replied by vit on topic Error 2360 overheating
HBL2360

Please Log in or Create an account to join the conversation.

More
4 years 2 months ago #29531298 by TechSupport
Replied by TechSupport on topic Error 2360 overheating
I checked on my HBL2360 using firmware 3/31/15 this is not an issue. It blinks 1 sec on, 1 sec off.

dev.roboteq.com/dev1/index.php/support/downloads

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.119 seconds
Go to top