- Posts: 5
- Thank you received: 0
FBL2360 status led not in documentation
I'm using FBL2360 since one year.
On the unit now in my hand I have status led green blinking one flash red and cannot decode this status in documentation.
It's connected by usb cable to a PC, and I cannot connect Roborun.
Could you help me please?
This is an unkown pattern.
If possible, try to connect the controller to a PC via the COM port and report what you see on a terminal emulation window (e.g. hyperterminal, real-term, ....)
COM port always works and it is usually possible to recover if it is a problem related to firmware fault.
Try also to power the controller via the Power Control wire.