Menu

Topic-icon MGSW1600 using RS232 communication

More
6 months 1 day ago #29534610 by bijusi
Hi there,

I am using the sensor MGSW1600 and I would like to communicate the sensor with a computer via RS232. At the computer side, I use Hyper Terminal to send/receive data from the sensor. When I powered the sensor, in the hyper terminal, I got this message:
"<0>Starting ...
FID=Roboteq v3.0 MGSW1600 09/06/2018"
However, when I attempt to read the data from the sensor by sending this command "?MGD", I did not get any signal from the sensor. Please give me support.
Attachments:

Please Log in or Create an account to join the conversation.

More
6 months 17 hours ago #29534611 by bijusi
The problem was solved by myself. The sensor is so quite interesting.

Please Log in or Create an account to join the conversation.

More
4 months 2 weeks ago #29534650 by Mateus
How did you fix this problem?

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.084 seconds
Go to top