Menu

Topic-icon phase advance angle for IPM

More
10 months 2 weeks ago #29534498 by dhilli.babu@gmail.com
Hello All,

How to define the phase advance angle for an IPM in the drive?

Thanks
Dhilli babu

Please Log in or Create an account to join the conversation.

  • Gabriel_Isko
  • Gabriel_Isko's Avatar
10 months 2 weeks ago #29534502 by Gabriel_Isko
Replied by Gabriel_Isko on topic phase advance angle for IPM
It should be our Angle Timing Advance setting under sinusoidal settings. I believe in our current release firmware, it is only available in sinusoidal commutation mode.

Please Log in or Create an account to join the conversation.

  • Gabriel_Isko
  • Gabriel_Isko's Avatar
10 months 2 weeks ago #29534503 by Gabriel_Isko
Replied by Gabriel_Isko on topic phase advance angle for IPM
It should be our Angle Timing Advance setting under sinusoidal settings. I believe in our current release firmware, it is only available in sinusoidal commutation mode.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.080 seconds
Go to top