Menu

Login Form

  1. Support
  3. Forum
  5. Roboteq Motor Controllers
  7. Controller Configuration & Operation
  9. MDC 2460 - Commands for rotating dcmotor clockwise and anticlockwise direction

Topic-icon MDC 2460 - Commands for rotating dcmotor clockwise and anticlockwise direction

More
4 months 4 weeks ago #29534507 by Sumesh S
MDC 2460 - Commands for rotating dcmotor clockwise and anticlockwise direction was created by Sumesh S
I have interfaced MDC2460 with beagle bone black via RS232. Now I have to control motor rotating direction using commands passed through the RS232. What are the commands for rotating motor clockwise or counter clock wise direction.? Also I want to know how can we use MDC2460 for steering purpose ?

Please Log in or Create an account to join the conversation.

More
4 months 4 weeks ago #29534508 by Gabriel_Isko
Replied by Gabriel_Isko on topic MDC 2460 - Commands for rotating dcmotor clockwise and anticlockwise direction
In most movement modes, the G command will send the motor a movement command. You should take a look at it's documentation on page 228 of our User Manual

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
  1. Support
  3. Forum
  5. Roboteq Motor Controllers
  7. Controller Configuration & Operation
  9. MDC 2460 - Commands for rotating dcmotor clockwise and anticlockwise direction
Time to create page: 0.124 seconds
Go to top