Menu

Topic-icon How to configure Digital Output to High when booting up

More
4 months 1 week ago #29534572 by pohetsn
Digital Outputs seem to be Low by default for HDC2450. My application triggers action when the active level is Low. Even though I set theses Digital Output to be High in my script and enabled the script to auto-start, there was a brief moment where the Digital Output is Low before the script is executed, which leads to unwanted actions when booting up HDC2450. Is there a way to configure these Digital Outputs to High when booting up? Thanks

Please Log in or Create an account to join the conversation.

More
4 months 1 week ago #29534573 by Gabriel_Isko
Unfotunately, there is no way because the output transistors require power to be activated and close the output circuit. You will have to wait for the digital outputs to activate after bootup to start your application, unfortunately.

Please Log in or Create an account to join the conversation.

More
4 months 1 week ago #29534578 by pohetsn
Got it. Thank you for your prompt response.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.096 seconds
Go to top