Menu

Topic-icon HOW TO CONFIGURE ENCODER ?

More
5 months 1 week ago #29534583 by Vanlaint96
I use MDC2460 and motor TZBOT 1.1kW (model TZ18-D11S02). I interface MDC2460 with PC through ROBOTRUN+ tool.
Pulses/rev paramate of motor is 34000, but Pulses/rev paramate in ROBOTRUN+ tool <= 32000.
I need everyone's help to be able to read the speed accurately.
Thankyou very much !

Please Log in or Create an account to join the conversation.

More
5 months 6 days ago #29534597 by Gabriel_Isko
Can you send the specifications of your encoder? That is an extremely high resolution.

Please Log in or Create an account to join the conversation.

More
5 months 6 days ago #29534598 by Vanlaint96
I am not know information this encoder. But I tried rotate the motor 1 round and read count is 136000.

Please Log in or Create an account to join the conversation.

More
5 months 6 days ago #29534599 by Vanlaint96
I think PPR of encoder 1000 p/r, and Gear ratio is 1:34, but I don't know configurator Gear ration. Can you help me ?

Please Log in or Create an account to join the conversation.

More
5 months 4 days ago #29534609 by Gabriel_Isko
You should input 1000 PPR for the resolution.

Please Log in or Create an account to join the conversation.

Moderators: tonysantoni
Time to create page: 0.103 seconds
Go to top